 |
 |
Cusco Front Camber Plates:
These feature a pillowball mount for improved steering response and elimination of the flex associated with rubber OEM mounts. The pillowball design improves stability at speed, in corners, and under heavy braking for optimal performance. They feature a .6mm thick aluminium plate and simple 4-bolt camber adjustment. Designed for use with the stock suspension or anything maintaining the stock mount and shock shaft diameter.
FITMENT: 02-07 WRX & STi
Part #: cus666410A
MSRP: $250
Our Price: $220
Inventory: Usually ships next day
|
 |
Cusco Rear Camber Plates:
These feature a pillowball mount for improved steering response and elimination of the flex associated with rubber OEM mounts. The pillowball design improves stability at speed, in corners, and under heavy braking for optimal performance. They feature a .6mm thick aluminium plate and simple 4-bolt camber adjustment. Designed for use with the stock suspension or anything maintaining the stock mount and shock shaft diameter.
FITMENT: 02-03 WRX Only. Only fits linear springs (like Tein), not progressive (like hotchkis).
Part #: cus658420A
MSRP: $250
Our Price: $220
Inventory: Usually ships next day
|
 |
Eibach Front Camber Plates:
Eibach front strut mounts allow a camber adjustment range of -1.25 degree to +1.25 degree, and a caster adjustment of -1.25 degree to +1.25 degree. Eibach front strut mounts are a effective way to add ride stability, and make camber adjustments after lowering your Subaru, or preparing for a track day. Designed for use with the stock suspension or anything maintaining the stock mount and shock shaft diameter.
Sold as a pair.
FITMENT: 02-07 WRX & STi.
Part #: eib5.67650K
MSRP: $420
Our Price: $260
Inventory: 4 in stock
|
 |
 |
H&R Camber Bolts:
Lowering your vehicle increases negative camber. H&R Triple C camber adjusters are a simple, yet effective means of removing excessive camber, adjusting your vehicle's camber settings, or even correcting small side-to-side camber variations for precise alignment.
Consisting of a pair of specially-designed bolts, H&R's patented Triple C camber adjusters replace the original upper fastening bolts on all McPherson strut applications. As the bolt is turned, a small cam eccentric alters the vehicle's camber, allowing adjustments from 0-3 degrees, positive or negative.
Sold as a pair, an entire car requires 4.
FITMENT: 02-07 WRX & STi
Part #: hrTC114
MSRP: $59
Our Price: $39
Inventory: 22 in stock |
 |
 |
Eibach Camber Bolts:
Eibach camber bolts allow you to adjust +/- 1.75 degrees; which will allow you to compensate for lowering your vehicle and return it to OEM alignment specs. The increased adjustment will also enable experienced suspension tuners to increase camber for improved off-road performance.
Sold as a pair, an entire car requires 4.
FITMENT: 02-07 WRX & STi
Part #: eib5.81260K
MSRP: $28
Our Price: $17
Inventory: 19 in stock
|
