|
|
| Brian Crower 02-05 WRX EJ205 & 04-07 Sti EJ257 Valvetrain
|
| WRX EJ205 Cams - STi EJ257 Cams - Spring/Retainer Kit
|
|
|
The Brian Crower Stage 2 Street/Strip Specification Cams for the 02-05 WRX EJ205 and 04-07 STi EJ257 are Plug and play application. Short duration for nice street manners, slight lope at idle. Excellent all purpose cars and daily drivers. The stock springs and retainers can be used but the BC spring and retainer kit is recommended.
|
| The Brian Crower Stage 3 Race Specification Cams for the 02-05 WRX EJ205 and 04-07 STi EJ257 are designed with a longer duration profile and added rpm potential. These Cams are intended for fully built engines with forged internals. Upgraded springs & retainers, tuning and ECU modifications are required to run stage 3 cams.
|
|
| Brian Crower |
Adv. Dur. |
Dur @ .050 |
Lift |
| Stage 2 |
272/272 |
222/222 |
.400/.400(in) 10.16/10.16(mm) |
| Stage 3 |
280/280 |
234/234 |
.425/.425(in) 10.80/10.80(mm) |
| Shipping costs are calculated upon checkout
FITMENT: The EJ205 and EJ257 engines require different part numbers choose accordingly below.
|
| FITMENT: 02-05 WRX EJ205 only.
|
| Description |
Part #: |
MSRP: |
Price: |
Inventory |
|
Brian Crower Stage 2
EJ205
|
BC0601 | $650 | $605 | 1 in stock | |
Brian Crower Stage 3
EJ205
|
BC0602 | $650 | $605 | 4 in stock | |
NOTE: Intake camshafts are setup for non AVCS operation. If running AVCS, you must completely remove the four set screws located in the front of each intake cam (dowel pin side) using a 2.5mm allen wrench. This will allow oil to actuate the active valve control system.
FITMENT: 04-07 STi EJ257 only.
|
| Description |
Part #: |
MSRP: |
Price: |
Inventory |
|
Brian Crower Stage 2
EJ257
|
BC0621 | $725 | $674 | Usually ships next day | |
Brian Crower Stage 3
EJ257
|
BC0622 | $725 | $674 | 3 in stock | |
 |
Designed for high rpm, Brian Crower valve springs are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures for consistent pressures. BC titanium retainers are CNC machined from 6AL4V round bar titanium to exacting tolerances. JSC Speed recommends upgrading valvesprings whenever you change cams; Brian Crower valvetrain components are a great choice for your WRX or STi -- they are top quality at an unbeatable price!
|
Spring Pressure: Seat: 1.420(in) @ 60 lbs, Open: 1.000(in) @ 160 lbs, Coil Bind: 0.860(in), No machine work required.
Shipping costs are calculated upon checkout
KIT INCLUDES: 16 x single coil valve springs, 16 x titanium retainers.
FITMENT: 2002-05 Subaru WRX EJ205 & 2004-07 STi EJ257
|
| Description |
Part #: |
MSRP: |
Price: |
Inventory |
|
| Brian Crower Springs & Retainers |
BC0600 | $235 | $219 | 3 in stock | |
| Search By Part #: |
|
|
| Keyword Search: |
|
|
| Search By Brand |
|
|
|
