|
|
| Thermo-Shield and Heavy Duty Thermo-Shield |
|
The Thermo Tech Thermo-Shield is used protect hoses or wires in your engine bay from 90% of radiant heat and up to 2000 degrees. It is not always practical to remove hoses and wires to install a Thermo-Sleeve, so the Thermo-Shield is the perfect alternate. It is adhesive backed tape for a simple install and professional finish. The Heavy Duty Thermo-Shield is two times thicker for those extra high heat areas. |
| Description: |
Part #: |
MSRP: |
Price: |
Inventory |
|
| Thermo-Shield 1 1/2" X 15' Roll |
14002 |
Heavy Duty Thermo-Shield 1 1/2" X 15' Roll (twice as thick) |
14000 |
| Thermo-Sleeve |
|
The Thermotec Thermo-Sleeves protect vital hoses and wires in your engine bay from high temperatures. Thermo-Sleeves are perfect for oil or coolant lines that run close to your turbo or exhaust manifold. The light-weight construction provides more insulating than traditional bulky rubber-coated fiberglass. The aluminized sleeving reflects over 90% of radiant heat, and is fireproof and oil resistant. Thermo-Sleeves are sold in three or twelve foot sections, and five different inner diameter sizes. |
| Length: |
ID: |
Part #: |
MSRP: |
Price: |
Inventory |
|
| 3 ft. |
.5in |
14005 |
| 12 ft. |
.5in |
14006 |
| 3 ft. |
1in |
14010 |
| 12 ft. |
1in |
14011 |
| 3 ft. |
1.5in |
14015 |
| 12 ft. |
1.5in |
14016 |
| 3 ft. |
2in |
14020 |
| 12 ft. |
2in |
14021 |
| 3 ft. |
2.5in |
14025 |
| 12 ft. |
2.5in |
14026 |
| Express Sleeve |
|
Have you ever finished installing oil or fuel lines only to have to redo the install because you forgot to put a thermo-sleeve on? The new Thermotec Express Sleeves eliminate this problem w/ a Velcro seal allowing you to easily install or remove your Thermo-Sleeve at any time. Thermotec Express Sleeves have the same properties as the original Thermo-Sleeves reflecting over 90% of radiant heat. They are also fireproof and oil resistant. |
| Description: |
Part #: |
MSRP: |
Price: |
Inventory |
|
Express Sleeve 3 ft - 1.5 inch I.D. |
14035 |
Express Sleeve 12 ft - 1.5 inch I.D. |
14036 |
Express Sleeve 50 ft - 1.5 inch I.D. |
14035-50 |
| Silicon-Coated Heat Sleeve |
|
Thermotec Silicon-Coated Heat Sleeves protect wires, hoses, and fuel lines from excessive heat. They are constructed of fiberglass fire sleeving wrapped with a compound silicon rubber. The Thermotec Silicon-Coated Heat Sleeves work great for consistent temperatures of 500° F and up to 2200° F short term exposure. This product is also available in 50ft. lengths - please call for more information. |
| Description: |
Part #: |
MSRP: |
Price: |
Inventory |
|
| Black 1/2 inch x 3 ft |
18050 |
| Black 1/2 inch x 10 ft |
18050-10 |
| Black 1/2 inch x 50 ft |
18050-50 |
| Silver 1/2 inch x 3 ft |
18051 |
| Silver 1/2 inch x 10 ft |
18051-10 |
| Silver 1/2 inch x 50 ft |
18051-50 |
| Black 3/4 inch x 3 ft |
18075 |
| Black 3/4 inch x 10 ft |
18075-10 |
| Black 3/4 inch x 50 ft |
18075-50 |
| Silver 3/4 inch x 3 ft |
18076 |
| Silver 3/4 inch x 10 ft |
18076-10 |
| Silver 3/4 inch x 50 ft |
18076-50 |
| Black 1 inch x 3 ft |
18100 |
| Black 1 inch x 10 ft |
18100-10 |
| Black 1 inch x 50 ft |
18100-50 |
Silver 1 inch x 3 ft |
18101 |
| Thermo-Flex Wire & Hose Shielding |
|
Thermotec Thermo-Flex is a flexible composite material designed to be abrasion resistant able to withstand up to 750 degrees. Constructed from aluminum, stainless steel and silica, these shields are the perfect option for when ever a flexible light weight wire or hose shielding is needed in your engine bay. The Thermo-Flex wire/hose shields are available in a variety of lengths and colors and can be slit for installation on non-removable hoses or wire looms. |
 |
|
|