|
|
| Header Manifold Blanket |
|
The Header Manifold Blanket provides excellent heat-retention for exhaust headers and manifolds. This flexible heat shield simply clips into place on the upper portion of the header. The fabric side of the material should be facing the heat source, and the aluminized side facing away - offering protection from abrasion and harmful liquid spills. The Header Manifold Blanket is available in two sizes: (2) 20 inch by 24 inch blankets for V6 & V8 applications, and (1) 36 inch by 40 inch blanket for straight 6 & 4 cylinder engines. |
| Description: |
Part #: |
MSRP: |
Price: |
Inventory |
|
Universal V6/V8 Kit
(2) Two 20in x 24in blankets |
14003 |
Universal inline 4/6 Kit
(1) One 36in x 40in blanket |
14004 |
| Aluminized Heat Barrier |
|
The Aluminized Heat Barrier is made up of woven silica with a flexible aluminized finish. The highly-reflective surface of the material is capable of withstanding radiant temperatures in excess of 2000°F.
The Aluminized Heat Barrier can be installed using standard rivets with a backup washer or weather strip adhesive. The use of clamps or straps such as Thermo-Tec's Snap Strap can be used to hold the blanket in place for manifolds or exhaust systems. The Adhesive Backed Heat Barrier can easily be applied to any surface or wrapped around a hose or wire to make a clean professional appearance without the use of clamps. |
| Description: |
Part #: |
MSRP: |
Price: |
Inventory |
|
Non-Adhesive Heat Barrier
40in x 36in |
14001 |
Adhesive Backed
Heat Barrier 12in x 12in |
13500 |
Adhesive Backed
Heat Barrier 12in x 24in |
13575 |
Adhesive Backed
Heat Barrier 24in x 36in |
13585 |
Adhesive Backed
Heat Barrier 24in x 48in |
13590 |
Adhesive Backed
Heat Barrier 12in x 50ft |
13575-50 |
| Kevlar Heat Barrier |
|
The Kevlar Heat Barrier is made from Kevlar with a Mylar finish. The Barrier can withstand up to 3000deg F of radiant heat and can withstand direct contact up to 1100deg F. Kevlar heat barrier can be installed using standard rivets with a backup washer or weather strip adhesive. The use of clamps or straps such as Thermo-Tec's Snap Strap
can be used to hold the blanket in place for applications on manifolds or exhaust systems. In applications such as a heat shield on the undercarriage above the exhaust the material should be held in place by fasteners as decribed above. |
| When used as a heat shield, the barrier is installed so the bright metallic surface faces the heat source. When used to retain heat in applications such as exhaust manifolds, the barrier is installed with the fabric side facing the heat. This allows the metallic surface to act as a barrier to prevent the penetration of liquids. |
| Description: |
Part #: |
MSRP: |
Price: |
Inventory |
|
| Kevlar Heat Barrier 26" x 40" |
16850 |
| Heavy-Duty Spray Adhesive |
 |
ThermoTec heavy duty spray adhesive is a great all purpose solution for anywhere you need a quick drying, fast bonding high temp adhesive. Works great with Thermo-Guard FR, Cool-It Mats and the Aluminized Heat Barrier products, just to name a few. Great to use anywhere that you need a secure, long lasting and easy to apply bond. Comes in a large 16.75oz can. Because this item is considered a hazardous material, it is not eligable for express shipping. Please call 1-800-JSCSPEED for more information. |
| Description: |
Part #: |
MSRP: |
Price: |
Inventory |
|
| Heavy Duty Spray Adhesive |
12005 |
|
| Search By Part #: |
|
|
| Keyword Search: |
|
|
| Search By Brand |
|
 |
 |
 |
 |
 |
|
Subscribe to our feed for Special Deals!
