|
|
| SPEC Clutch Kits for 2004-2007 RX-8 |
| Spec RX8 Clutch Kits are some of the highest quality on the market -- with a specific stage for any level of performance. Choose your specific kit below. Spec RX8 clutch kits include the pressure plate, applicable bearings(s), disc, and alignment tool. We do not recommend a clutch kit above a Stage 3+ for the RX8 unless you are going for full-race use. Stage 4 and 5 clutch kits, while available, are not recommended, even for track cars since they are an unsprung design. JSC Speed is a SPEC distributor and will price match/beat on SPEC products whenever possible if you contact us prior to purchasing. |
| JSC Speed is a SPEC distributor and will price match/beat on SPEC products. If you find a better price elsewhere give us a call, prior to purchasing, and we will either MATCH or BEAT it. |
| SPEC Stage 1:
High clamp pressure plate; steel-backed, woven organic disk; bearings.
Suggested for:OEM replacement for daily driven, lightly modified RX-8s.
Part #: specSZ481
MSRP: $359
Our Price: $323
Inventory: Usually ships in 1-2 days |
| SPEC Stage 2:
High clamp pressure plate; segmented, chatter-free Kevlar disc; bearings.
Suggested for:spiritedly driven, moderately modified RX-8s.
Part #: specSZ482
MSRP: $429
Our Price: $386
Inventory: Usually ships in 1-2 days |
| SPEC Stage 2+:
Maintains Stage 2 feel for good daily drivability, but has a higher torque capacity. High clamp pressure plate, composite multi-friction carbon-kevlar material, high torque sprung hub and disc assembly, bearing and tool.
Suggested for:Track/strip, highly modified RX-8s.
Part #: specSZ483H
MSRP: $479
Our Price: $431
Inventory: Usually ships in 1-2 days |
| SPEC Stage 3:
3-piece disc with composite multi-friction carbon-kevlar material, high torque sprung hub and disc assembly, bearing and alignment tool.
Suggested for:Track/strip, highly modified or turbocharged RX-8s.
Part #: specSZ483
MSRP: $429
Our Price: $386
Inventory: Usually ships in 1-2 days |
| SPEC Stage 3+:
Maintains Stage 3 feel for good daily drivability, but has a higher torque capacity. High clamp pressure plate, full-faced carbon metallic friction, high torque sprung hub and disc assembly, bearing and alignment tool.
Suggested for:Track/strip, highly modified or turbocharged RX-8s that required more torque holding than a stage 3 kit can provide.
Part #: SpecSZ483F
MSRP: $579
Our Price: $521
Inventory: Usually ships in 1-2 Days |
| SPEC Stage 4:
High-clamp pressure plate, 2-piece rigid disc, bearings and a tool. Available in 3 or 6 wing design for serious road racing and drag racing. Not Recommended for street driving.
Suggested for:Dedicated race applications only
Part #: specSZ484
MSRP: $429
Our Price: $386
Inventory: Usually ships in 1-2 days |
| SPEC Stage 5:
High-clamp load pressure plate, iron disc, bearings and alignment tool. Not Recommended for street driving.
Suggested for:Dedicated race applications only
Part #: specSZ485
MSRP: $579
Our Price: $521
Inventory: Usually ships in 1-2 days |
 |
|
| Search By Part #: |
|
|
| Keyword Search: |
|
|
| Search By Brand |
|
|
Subscribe to our feed for Special Deals!
