|
|
| Forced Performance Red Evo 8 & 9 Turbocharger |
 |
 |
The Forced Performance Red Turbo isn't your average stock replacement turbo: The FP Red is capable of supporting up to 35psi of boost and can deliver over 550whp. This is one of the best bolt on turbochargers for the Evo 8/9 on the market. With boost coming on around 3700 RPM the FP Red is also very versatile and can be used for all types of motorsports; from road racing to drag racing this turbo stands out from the others. The FP Red is really designed to provide 22-24psi (good for about 450-500hp) on pump gas or 30-35psi (550-600hp) on race fuel, so if you are only looking to run 18-22psi you may want to look closer at the FP Green. |
| 80mm Flow Advancement Port: Forced Performance's custom 80mm Flow Advancement Port compressor cover helps reduce huffing and surging sounds that are often reported with larger, stock format hybrids when lugging the engine at low RPM and high boost pressure but perhaps even more useful is the way it helps feed the splitter blades of the compressor wheel resulting in increased flow. This larger inlet also increases the volume of the intake air pipe and reduces vacuum at the inlet of the turbo. Additionally the volute of the cover is now exactly tailored to the HTA wheel's aero for the best performance possible. |
 |
| The FP Red with 80mm Flow Advancement Port requires the FP Intake Air Pipe or a 3" coupler. The FP Intake Pipe is undercover black and designed to replace the stock intake air pipe perfectly, allowing the use of the OEM recirculating BOV and the valve cover crankcase vent. The 80mm Flow Advancement Port cover could also be used with standard 3" air intake pipes by utilizing a straight 3" coupler. |
 |
18psiHP Wastegate Actuator: All FP Evo Red turbocharger come with an 18psi HP wastegate actuator. Forced Performance's HP Evo Red wastegate actuator features a heavy duty spring and does not crack open until boost reaches 18psi. If you plan on running high boost with race gas or methanol injection, your Evo will benefit from the extra spring pressure this 18psi WGA will provide. Using the 18psi HP actuator will result in retaining more boost higher into the RPM range compared to the stock Evo 9 wastegate actuator's meager 11psi threshold. |
| The HP actuator isn't going to offer much benefit on pump gas cars running 20-22psi, but it isn't going to hurt you either. Be also advised that boost cannot be set BELOW 18psi when using FP's 18psi HP actuator; this may be a concern if you are not prepared to run your Evo with as much power as this set up will deliver. |
| Shipping costs are calculated upon checkout |
| FITMENT: 2006 Evo IX, 03-05 Evo 8 Requires Installation Kit. FP 3" Intake Pipe Required. |
| Turbo: |
Part #: |
MSRP: |
Price: |
Inventory |
|
FP Red
w/ 80mm Surge Port &18 PSi WGA:
Direct fit for Evo 9, Evo 8 requires installation kit. |
fp-EVO-RED |
FP 3" Intake Pipe
for FP Turbos with 80mm Flow Advancement Port |
fp-EVO-INTAKE-PIPE |
Evo 8 Install Kit:
Required kit to put FP Red on an 03-05 Evo 8. |
EVO-GREEN-8KIT |
| Search By Part #: |
|
|
| Keyword Search: |
|
|
| Search By Brand |
|
 |
 |
 |
 |
 |
 |
|
|
Subscribe to our feed for Special Deals!
