04-06 Scion xA / xB Performance Brake Pads

Posi Quiet pads are a great budget minded replacement because they manufactured using the same positive molding process utilized by OEM manufacturers. This process assures consistent friction material density throughout the pad, resulting in even wear and performance characteristics throughout the life of the brake pad. Posi Quiet pads feature precision cut backing plates and mechanically attached shims, small details that ensure proper fitment in the caliper and virtually eliminate noise associated with pad vibration.

An additional scorching process forces any impurities out of the friction material and pre-burnishes the pads to speed up the pad break-in process.

Axxis Ultimate brake pads are a Kevlar and Ceramic compound that offer far and away the best price to performance ratio currently available in a performance street pad. When installing these pads on your 04-06 Scion xA / xB, you must be sure to properly bed the Ultimates in; this procedure is critical to achieve the optimum performance from this pad. Once bedded correctly, you can expect greatly improved initial bite, higher operating temperature range, and minimal rotor wear. Axxis Ultimates are know to create a noticeable amount of dust, but are also a very quiet pad. Axxis Ultimates are excellent for the moderately aggressive daily driver and are a capable autocross pad.

Hawk Performance Ceramic brake pads were developed for those enthusiasts who want to improve stopping power without the annoying side effects sometimes associated with more aggressive pads. Hawk Performance Ceramic pads are engineered with a linear friction profile for maximum performance while reducing NVH (noise, vibration, and harshness) for a smoother ride and ultra-low brake dust accumulation. In addition, you can expect Hawk ceramic brake pads to provide increased pad and rotor life and a more responsive ABS braking system. Hawk Performance Ceramic pads are intended for street use only

Hawk HPS (High Performance Street) pads offer a tremendous improvement in braking distance over the 04-06 Scion xA / xB's OEM pads. Hawk's unique Ferro-Carbon formula was developed for street performance using the safety and quality of Aerospace and Motorsports severe-duty friction technology. The HPS compound offers a high coefficient of friction and can provide you 20-40% more stopping power and improved resistance to fading over Scion's OEM replacement pads. HPS's Ferro-Carbon compound provides your Scion xA / xB with increased stopping power, long-life, less dust and reduced noise compared to other after market performance brake pads. All Hawk Performance products provide a limited lifetime warranty, ensuring products to be free of defects from manufacturer's workmanship and materials. Hawk HPS pads are designed primarily for a daily driven Scion tC but will hold up under light autocross duty as well.

Hawk Blue 9012 compound pads are for the dedicated race/track Scion only. Hawk's 9012s utilize a medium/high torque and high temperature compound optimized for repeated heavy braking associated with track use. Tracked 04-06 Scion xA / xB equipped with the Hawk Blues will see consistent, fade-free braking, but they do take some time to get up to temperature and will make lots of noise and dust (not that you care when you're on the track!). Blues are the #1 selling brake pad material for SCCA Club racers.