91-98 240SX / KA24DE Brian Crower Camshafts

Brian Crower Nissan KA24DE cams are manufactured to top-quality specs. Brian Crower high performance camshafts are ground on state-of-the-art CNC cam grinders to insure accuracy and tolerances to within .02mm. Every Brian Crower camshaft profile has been prototyped and dyno tested for proven horsepower results prior to placed into mass production. By grinding cores in high volume, Brian Crower, Inc. is able to pass the cost savings on to the end user. Make no mistake, these are top quality Nissan cams at an affordable price.

All Brian Crower camshafts are checked on a high speed, sub-micron accuracy measuring gauge. The Adcole Camshaft Measuring System uses individual measuring heads for each cam journal and cam lobe, with .01 micron resolution, taking one datum point each 1/10th of a degree or 3,600 data points per revolution. Measuring camshafts for rise error and chattermark detection, this model can measure 200 parts per hour.

We suggest using Brian Crower valvespring and retainer kits as Brian Crower recommends it for all the camshaft sets listed below.

Brian Crower Stage 2 NA cams have a short duration for nice street manners, and a slight lope at idle. Excellent all purpose spec cams. Upgraded valve springs and retainers are not required with this kit, but are suggested. Cam Card

Brian Crower Stage 3 NA Race are intended for fully built KA24DE engines. Extensive modifications, high compression pistons and tuning are highly recommended. Upgraded valve springs and retainers are required with this kit. Cam Card