03-06 350Z & G35 Connecting Rods

Brian Crower rods for the VQ35DE engine in the 03-06 Nissan 350Z and 03-07 Infiniti G35 are made from 4340 billet steel. All Brian Crower rods are designed for high horsepower forced induction and high-revving naturally aspirated engines. Manufactured in state-of-the-art CNC machining centers, Brian Crower rods are a high-precision choice for your 350Z or G35. This is a full set of six (6) rods including ARP 220,000 p.s.i. bolts and aluminum bronze bushings.

If you are looking for connecting rods that can take whatever you can throw at them, look no further. Carrillo connecting rods are forged and use only the strongest materials to ensure they will hold massive amounts of power. They are run through a thorough inception process once finished to ensure each rod is made to the highest quality standard. These rods are for enthusiasts that require the absolute best and will not compromise on quality.

The A-beam rod is a light weight rod that is designed for high revving motors. It can hold moderate horsepower numbers and is the rod of choice for most street cars looking to push more power than the stock internals can handle, they are rated for up to 650whp.

Carrillos's Pro-Super A beam (Pro-SA) rods are lighter than the traditional H-beam style rod, yet still unbelievably strong. Pro-Super A beam rods bridge the gap between Pro-H and standard Pro-A rods, designed for use in mid to high horsepower and high boost turbocharged and supercharged applications. Pro-Super A beam rods allow for more horsepower and higher RPMs with the advantage of a reduced windage design. Pro-Super A beam rods for the 350Z / G35 ship with standard 3/8th inch WMC cap bolts and are rated to 800whp, they are great for cars that see both street and race driving.

The H-beam rod has become the industry standard design for high-performance applications. Considering the best overall performance of the part, combined with the least amount of weight, the H-beam is Carrillo's strongest, most durable design available. Carrillo H-beam rods are recommended for race applications where no compromise in performance is possible. Pro-H rods are available with 3/8th inch cap bolts in either standard WMC or Carrillo specific design which can be retorqued as many times as you want and will not need to be replaced. These rods are for 1000+whp race only machines and are not optimal for street use.

For over 25 years, Crower has been manufacturing top of the line connecting rods. Only the finest, USA made 4340 chromoly (chromiummolybdenum) steel is used in the production of Crower steel billet connecting rods. Every rod is fully CNC machined to remove all surface imperfections, 100% magnaflux inspected and checked for surface hardness, then machined to final size to exacting tolerances within 1.1000" of an inch.

Connecting rods are one of the most important components in your high performance engine. It is important that the rods you put in your engine are made from the highest quality materials and are manufactured correctly. Eagle is well know for the quality connecting rods they produce. Each rod is multi-stage heat-treated, x-rayed, sonic tested, magnafluxed, 100 percent machined, and shot-peened to stress-relieve the metal. They can be found in almost any application from street cars to drag cars.

Manley has been in business since 1966 producing aftermarket and OEM engine internals, supplying such cars as the SVT Mustang Cobra and Ford GT. Manley's premier connecting rod series is the Turbo Tuff line which was designed to be the best money can buy. Manley Performance is synonymous with winning and their products power some of the fastest cars around.

Manley H Beam rods are weight matched within +/- 1.5 grams of each other and both ends of the rod are rounded perfectly. These are the perfect rods for street applications pushing up to 600 wheel horsepower.

Manley Turbo Tuff I Beam Rods are made using forged 4340 aircraft quality vacuum degassed material. Manley Turbo Tuff rods are machined in house, in the USA, to ensure the highest quality product. Each rod is shot-peened and magnafluxed after machining. The bores are round with no taper and these rods use APR 2000 cap screws for ultimate strength.