JSC Speed.com | Contact JSC         Login | Create Account
free ground shipping on most orders over $199
click here to email sales@jscspeed.com with your price match request

00-05 Celica GT & GT-S ACL Bearings

ACL is an engine builders top choice for their quality and consistency. Buy with confidence; you will find ACL in many cars on road as they are an Original Equipment supplier. Many racers, especially import racers, swear by both their stock and performance series crankshaft rod and main bearings. ACL premium bearings will not only hold up better and longer than OEM, but the special coating process will also help prevent premature engine bearing failures and expensive engine damage.

ACL’s Aluglide bearings provide a combination of moderate to high strength, good seizure resistance and excellent wear resistance. These bearings are ideally suited to vehicles where reliability and long service intervals are desirable. Aluglide bearings are highly preferred in modern import engines that have been designed for aluminum based bearings as OE standard fitment.


  • Please Note When Ordering Bearings:
  • Engine bearings require proper tolerance to be measured before purchase. If you are not sure what size bearings your build requires, please consult a professional engine builder. We are not responsible for incorrectly ordered bearings and can not take returns or provide exchanges on any engine internal components.
  • The 1ZZFE GT and the 2ZZGE GT-S use different Main and Rod Bearings, choose accordingly, below.
ACL Thrust Washers

ACL thrust washers are an often overlooked component of rebuilds. They prevent the crankshaft from moving around, thus keeping it in line with all of the other critical moving engine parts. It also helps the crankshaft to better stand up to stresses from clutch and flywheel operation.


  • FITMENT:
  • Toyota Celica GT & GT-S 2000-2005
Description Part # MSRP Price Inventory  
GT & GT-S Standard Thrust Washers 1T1853-STD $3.00 $2.40 1 available
ACL Rod Bearing Sets

When doing rods and pistons, it's a good idea to replace the rod bearings as well. Proper support via main bearings is crucial to prevent oscillations and wear that can damage the crankshaft and other components if the motor should move out of balance. ACL's high quality rod bearings will prevent fatigue, failure, and reduce drivetrain stress through their durable and strong design.


  • Note:
  • The 1ZZFE GT and the 2ZZGE GT-S use different Rod Bearings, choose accordingly, below.
  • FITMENT:
  • Toyota Celica GT 2000-2005
  • Toyota Celica GT-S 2000-2005
Description Part # MSRP Price Inventory  
GT Aluglide Rod Bearings (Standard) 4B1851-STD $36.64 $29.31 Out of stock: Call for ETA
GT-S Aluglide Rod Bearings (Standard) 4B1856-STD $38.01 $30.41 Out of stock: Call for ETA
GT-S Aluglide Rod Bearings (.25mm Over) 4B1856-.25 $38.01 $30.41 Out of stock: Call for ETA
GT-S Aluglide Rod Bearings (.50mm Over) 4B1856-.50 $38.01 $30.41 Out of stock: Call for ETA
GT-S Aluglide Rod Bearings (.75mm Over) 4B1856-.75 $38.01 $30.41 Out of stock: Call for ETA
GT-S Aluglide Rod Bearings (1.00mm Over) 4B1856-1.00 $38.01 $30.41 Out of stock: Call for ETA
ACL Main Bearing Sets

ACL's main bearings are made of a softer metal so that you don't wear out your crank or engine block. Additionally, a thin layer of oil lubricates the connection between the bearings and the crank allowing the crank to "float" and reduce wear. Proper support via main bearings is crucial to prevent oscillations and wear that can damage the crankshaft and other components as the motor moves further out of balance.


  • Note:
  • The 1ZZFE GT and the 2ZZGE GT-S use different Main Bearings, choose accordingly, below.
  • FITMENT:
  • Toyota Celica GT 2000-2005
  • Toyota Celica GT-S 2000-2005
Description Part # MSRP Price Inventory  
GT Aluglide Main Bearings (Standard) 5M1853-STD $60.34 $48.27 Out of stock: Call for ETA
GT-S Aluglide Main Bearings (Standard) 5M1857-STD $38.55 $30.84 Out of stock: Call for ETA
GT-S Aluglide Main Bearings (.25mm Over) 5M1857-.25 $38.55 $30.84 2 available
GT-S Aluglide Main Bearings (.50mm Over) 5M1857-.50 $38.55 $30.84 Out of stock: Call for ETA
GT-S Aluglide Main Bearings (.75mm Over) 5M1857-.75 $38.55 $30.84 Out of stock: Call for ETA
Mon-Fri 8am-8pm
© 2014 JSC Speed Inc.  All Rights Reserved.
510 Hyde Park, Doylestown, PA 18902
Tel: 215.489.2820  Fax: 215.489.2826
Hours:
Mon-Fri 8am-8pm

©2014 JSC Speed Inc.
All Rights Reserved.

510 Hyde Park
Doylestown, PA
18902

Tel: 215.489.2820
Fax: 215.489.2826